Summer Flowers Necklace

Design Team Member Bea Grob recently shared this fun and funky summer flower necklace made with Makin's Clay®  here on her blog. 

Fall Jewelry Collection

Fall Jewelry Collection by Cynthia Gougian

This fall jewelry collection was fast and super easy to make!  I used simple techniques to create dramatic, contemporary looks.  I was pleasantly surprised at how many pieces I was able to create with just a small amount of clay and a few findings! 

Materials List:

·     Makin’s Professional® Ultimate Clay Machine®

·     Makin’s Clay®  30g  in yellow (1/2 of a 60 gram package)

·     Makin’s Clay®  30g in red (1/2 of a 60 gram package)

·     Makin’s Clay® 30g  in black (1/2 of a 60 gram package)

·     Makin’s® 3 piece oval cutter set

·     Wilton® 6-piece Nesting Fondant Double Sided Cutters,Leaf Cutters

·     Makin’s® 3 piece flower cutter set

·     An acrylic clay roller

·     A tissue blade

·     Cornstarch, or powder

·     400 grit wet dry sand paper 

·     Dust mask

·     Makin’s® Texture Sheets – Set H ( I used the sheet labeled “Abstract B”) 

·     Deco Color® Premium 3-way chisel point pen, gold (optional)

·     1.5 mm Wire ferrule (Sometimes labeled for 16 AWG wire)

·     1/16  drill bit

·     Earring Wires of your choice

·     4 mm and 6 mm jump rings, or jump rings in sizes of your choice

·     Necklace cord of your choice

Instructions:

I used a blended clay sheet to create a veneer.  I began by rolling out Makin’s Clay® 30g in yellow on the thickest setting of the Makin’s Professional® Ultimate Clay Machine®.

I then trimmed it into a rectangle shape.

I cut the rectangle into 2 triangles. Then, I stacked the triangles.

I repeated steps 1-3 with 30 grams of red clay.

I placed the stacked triangles next to each other. I offset the points of the triangles slightly.  Then I used my clay blade to trim the triangles into a square. 

I rolled over the seam with a clay roller to adhere the red and yellow clay.

I continued rolling until the clay was just a little thicker than the widest setting on Makin’s Professional® Ultimate Clay Machine®.

Then I rolled the clay through machine at thickest setting (setting #1).

I folded the clay in half. 

I then rolled the clay through the clay machine at the thickest setting, folded side first. 

I continued folding the clay in the same direction and rolling it through the machine. Each time the clay was folded and rolled; it caused the clay to blend.  In this photo, the clay had been folded and rolled about 6 times.

When I was satisfied with my blend. I trimmed the clay into a neat rectangle shape. 

I then rolled the blend, short side first through the clay machine on setting #4.

I used a knee-high stocking filled with cornstarch to dust the Makin’s® texture sheet-Abstract B.  Cornstarch prevents the clay from sticking to the texture sheet.

I placed the blended sheet of clay on the texture sheet.  Then I rolled over the clay firmly with my clay roller.

I rolled out 30g of black clay on setting 4 of the clay machine.

I then misted the black clay with water. 

I place the blended, textured veneer on the black clay.  Then, I gently patted the veneer to adhere it to the black clay without damaging the texture. 

I used one of the leaf cutters to cut a pendant from the veneer. 

Then, I used one of the smaller leaf cutters to cut my first earring. 

I flipped the veneer over, then used the same smaller leaf cutter to cut a second earring from the veneer.  Flipping the veneer over results in earrings that are mirror images of one another. 

I used a 1.5 mm wire ferrule to cut holes for jump rings in the pendant and earrings. 

I had plenty of veneer left over.  So, I used the largest oval cutter from the Makin’s® 3 piece oval cutter set to cut 2 oval shapes from the veneer. 

Then, I used the smallest oval cutter from the Makin’s® 3 piece oval cutter set to cut out the center of the large ovals. 

I also used the medium sized oval cutter from the Makin’s® 3 piece oval cutter set to cut two ovals from the veneer.  

I pinched the top of the oval to form petal shapes.

I still had a small amount of veneer left.  So, I used the smallest flower cutter from the Makin’s® 3 piece flower cutter set to cut  2 flowers from the veneer.

I allowed all the shapes to thoroughly dry for 24 hours. Then I sanded the edges with 400 grit sandpaper.  Please note, Makin’s Clay® should NOT be wet sanded.  It needs to be dry sanded.  And, a dust mask should be worn when sanding any material. 

After sanding, I assembled all the shapes into finished earrings and a pendant. First, I used a 1/16 drill bit to drill holes in the tops of the petal shapes

Then, I used the paint pen to apply gold to the edges of the petals.  

Finally, I used 6 mm jump rings to attach the petals to ear wires.

I also created earrings from the oval shapes.  I began by drilling holes in the large ovals. Then, I drilled the smaller ovals.  

I used 4 mm and 6 mm jump rings to attach the shapes to each other and to ear wires. 

 

The flower shapes became another set of earrings.  First, I drilled holes in them.  Then, I added gold paint pen to the edges.

I used four 4 mm jump rings to create dangles that I attached to ear wires.  

 

The leaf pendant and matching earrings were super easy to construct!  I simply used 6 mm jump rings to attach the shapes to ear wires and a pendant cord.

I am totally in love with Makin’s® Texture Sheets – Set H!  The “Abstract B” sheet is my absolute favorite.  I think the texture allowed me to turn simple shapes into hip, cutting edge designs. 

Spring Bloom Polymer Clay Magnets

Spring Bloom Magnets by Naomi Scarparo

Spring will be here soon in Australia. I already see the first signs of flowers blooming in my garden and it inspired me to make these colourful flower magnets for my fridge and to remind myself to stop and smell the flowers...

Materials:

Makin’s Clay® - White

Makin's® Clay Roller or Makin's Professional® Ultimate® Clay Machine 

Makin’s Professional® Cutting Mat 

Makin's® Clay Push Molds - Floral Item #39005

Small, Soft Tip sculpting tool

Black Stamp Inkpad

Stamp with Quote - used ‘Have a Blooming Good Day’

Circle cutter 5cm diameter

Soft small tip paintbrush

Lumiere By Jacquard 573 Pearlescent Magenta, 557 Halo Violet Gold, 571 Pearlescent Turquoise, 554 Sunset Gold, 572 Pearlescent Emerald Green

Weldbound glue

Magnets 

Instructions:

Roll out your Makin's Clay® White, to the thickest setting on your clay machine, put some plastic wrap on top of your sheet of clay and press down firmly with the Circle cutter. This will give you perfectly rounded edges… (which I forgot to do, oops… but no big deal… just smooth the edges with your fingertips).

Ink your saying stamp ‘Having a Blooming Good Day’, then gently press the stamp into the clay and remove it leaving the stamp impression (don’t worry if the ink did not press into the clay clearly).

Using the Lumiere paints, Starting with the lightest colour - 571 Pearlescent Turquoise dab with a slightly damp small brush apply over the whole circle. 

  

Then using Lumiere - 573 Pearlescent Magenta, dot along the edges of the circle as if a blooming branch is leaning over.

Apply Lumiere - 554 Sunset Gold with a fine tip paintbrush in the impressed stamped quote. Then apply Lumiere - 572 Pearlescent Emerald Green around the base of the circle as though there is bush or shrubs around.

Allow the pain to dry. As the paint for the Quote magnet paint is drying, start making the flowers using the Makin's Clay® Clay Push Molds - Floral Item #39005. 

To use the molds

Lightly dust the push molds with cornstarch, shaking the excess off. This will help to keep the clay from sticking to the mold. Using the white clay, roll into a smaller size ball than the mold. Press the clay into the mold starting in the centre and working towards the edges. 

Tip - the clear view mold can be turned over to check for any air bubbles that need to be pressed out and to make sure that the areas are all filled.  

Remove excess clay that overlaps the edges of the mold. Remove the moulded flower gently by pressing the mold from the front side or use the clay chisel to help lift the mold out. You can clean up the edges using your fingertips and a soft pointed tip sculpting tool. 

Set some of the flowers in an arrangement that you like, an example of what I used is in a photo below. I used a mix of the 3 vine leaf and Roses (opened flower and bud). Place then together using some tacky glue or if still slightly damp a spritz of water. 

Paint the flowers using the Lumiere By Jacquard paints. I painted the flowers individually and once touch dry, I added 554 Sunset Gold to highlight areas like the centre of the flowers.

 Cut the clustered flower (pictured below) using the circle cutter, to add the top and bottom decoration, attach them sing tacky glue, and reshape if needed using the Soft tip sculpting tool.

Paint edges of the flowers and allow to dry for 24 hours.

Once dry turn over and paint the backs of the flowers. Allow to dry. 

Attach magnets to the back of the flowers with tacky glue. 

Tip - Check which side of the magnet is magnetic and ensure that it is glued facing out. 

Makin's Clay® is light weight and perfect to make magnets with as I didn’t have to worry too much about what strength of magnet is needed. I used an old business card magnet, cut into strips. 

Enjoy making your magnets to pretty up your fridge...