Zippy the Robot by Patricia Krauchune |
Here's a little bottle robot I made using a small piece of zipper, some ball chain and gears.
Makin's Clay®: Black Ball Chain 3 Mini Gears
Small Bottle 2 Square Eyelets 3 Glass Pins
Piece of Zipper 1 Large Gear / 1 Medium Gear 5 Minute Epoxy
Krazy® Glue Small Bulb Art C & Cosmic Shimmer Gilding Wax
Recommended Makin's® Tools:
Makin's Professional® Ultimate Clay Machine® Makin's® Texture Sheet - Tractor Tread B
Instructions:
Trim the piece of zipper to fit onto the front of the small bottle.
Use some Krazy® Glue to attach the zipper to the bottle.
Roll out some Black Makin's Clay® on the # 2 setting on the Makin's Professional® Ultimate Clay Machine®.
Cover the bottle with the rolled out clay and immediately add texture using the Tractor Tread B Makin's® Texture Sheet.
Push a couple of square eyelets into the side of the bottle to form a "socket" for the ball chain arms. Secure using Krazy® Glue.
Next I glued a medium size gear to the bottle top followed by a bulb for the robot's head.
Three small gears were added inside the zipper space.
A small piece of ball chain was added around the neck of the bottle and three glass pins were used to secure the small gears.
I used 5 minute epoxy to attach a large gear on the bottle bottom.
The robot was "colored" using Art C and Cosmic Shimmer Gilding wax.
No comments:
Post a Comment